Fix a hole in a door
Turn your broken door into a new one in minutes.
A hole in a door can be the result of a small accident and it’s easy to forget about it. But you shouldn´t! Make sure you learn how to fix a hole in a door and keep it looking good. It only takes a few seconds, so let’s get to it!
WHAT YOU NEED
- Putty filler (e.g. UniBond Repair Express Power Putty)
- A cloth
Get the Materials
All you need is Putty filler (e.g. UniBond Repair Express Power Putty), sandpaper and a cloth.
Mix the repair paste
With the help of the cutter included in the pack, cut off a piece of the Putty filler (e.g. UniBond Repair Express Power Putty) and knead it until you reach a uniform colour.
Clean the surface
To ensure better adhesion clean the surface of the door using a cloth.
Apply the product
Fill and rebuild the affected area. Don’t worry if there is excess product on the surface, it can be sanded later. Remember, the product reaches its maximum strength after 24 hours.
Sand the excess product for a smooth surface. When it dries, it turns completely white!